How To Fix – Liquid Detected in Lightning Connector

How To Fix - Liquid Detected in Lightning Connector

Apple frequently makes beta versions available for testing to guarantee that new updates are user-friendly and free of problems. “Liquid Detected in Lightning Connector” has been bothering iOS 14 and 15 users. Let’s try to shed some light on the situation.

Why Does My iPhone Say “Liquid Detected in Lightning Connector”?

Your iPhone can detect fluids in your Lightning port if you have an iPhone XS or later. When this happens, your iPhone may show a Charging Not Available error message that reads, “Liquid has been detected in the Lightning connector.”

If your iPhone displays this message, disconnect it from the charger and let it out to dry for several hours. Avoid inserting anything into your iPhone’s Lightning port while it dries out, such as headphones or another charger. The liquid in the Lightning port has the potential to irreversibly harm your iPhone’s hardware.

If you get this error, we don’t recommend charging your iPhone using Emergency Override. If your iPhone supports wireless charging, charging it using a Qi-enabled wireless charger while you’re charging port dries may be a safer option. However, if your iPhone has been exposed to a lot of water before, it’s generally advisable to avoid wireless charging as well; moisture could have spread to other components of your iPhone.

This can happen in a variety of ways, but here are a few of the most common:

Shower – if you leave your iPhone in the bathroom while showering, the humidity can rise to dangerous levels, causing moisture to build up inside your charging port.

Rain — if you are caught outside in a downpour or even a light rainfall, your phone may become wet.

Swimming pool — putting your phone in your pocket and jumping in the water will almost certainly get it wet!

Spilled drink — another definite way to get your iPhone wet is to spill coffee or water on it.

What if my iPhone is water-resistant?

Water-resistance is built into every iPhone in Apple’s current series. Your iPhone is water-resistant if you have an iPhone 8 or later.

However, just because your phone is water-resistant does not imply it is impervious to liquid damage.

water-resistant iPhones are not waterproof. This means that if your phone comes into contact with any liquid, the metal components inside can corrode and stop working properly.

The metal pins inside your lighting port are the same way.

The liquid, however, should not cause any long-term damage if there is no electrical current running through these metal pins (unless it leaves residue on the pins).

When your phone senses liquid in it, Apple automatically shuts the lighting connector. A current could cause the metal to corrode, rendering the connecting strip useless.

What Does Liquid Detect in Lightning Connector Mean

The pins in both components can be damaged if a user plugs in wet cables or there is moisture in the charging port. One of the two messages about quick actions you can take in such situations may appear on your phone.

The first message will alert users to the presence of liquid in the lightning connector. As a precaution, it will advise consumers to unplug the charger and let it dry for several hours. iPhone charging will not be available, according to the notification.

The second reason for this message to appear is when the sensors detect fluids after you add an accessory. The iPhone will advise you to dry the addition before doing it again.

You can choose to ignore the message and force charge your phone in any instance. It will put the phone at risk, but individuals are ready to take a chance in an emergency. A wireless charger is another excellent choice. Before you put your phone on a wireless charger, ensure sure the back of it is completely dry.

What to Do If iPhone Shows ‘Liquid Detected in Lightning Connector’ Error

The iPhone OS has a mechanism that detects moisture in the device’s lightning port. Because the charging and headphone connections share the same connector, this feature is useful.

Because the phone’s internals is susceptible to liquid, any system must be designed to alert the user in an emergency. However, the issue emerges when the phone displays the same message even though it is as dry as desert sand.

The issue affects later iPhone models such as the iPhone X, iPhone SE2, iPhone 12, and iPhone 13. The notification appears out of nowhere and interrupts the device’s normal operation. Thousands of reports against the bug resulted in no specific case being identified as the root cause. As a result, people began looking for ways to get around the notice.

What Should You Do If ‘iPhone Liquid Detected in Lightning Connector’ Pops up

The notification “liquid detection” appears on the phone. What actions can you take to get out of this predicament? Let’s look at what you shouldn’t do in haste before we give you advice on what to do.

  • To dry the wetness, do not use hair dryers or any other heat source.
  • Do not use cotton swabs or other cotton products to try to absorb moisture from the lightning connector.
  • To remove moisture from their phones, many people place them in rice. Small rice particles can get into the system and exacerbate the condition.

Now, let’s take a look at the things we should do in case of the “liquid detection in lightning connector” message:

Remove the Lightning Accessory and Dry out the Moisture

The first option is to follow the message’s instructions. Allow the charger to dry after removing it from the lightning port. If your phone has moisture trapped inside, keep it upright to allow the liquid to drain. You should not jiggle the phone or blow the lightning port during this procedure. It has the potential to aggravate the situation.

Dismiss It When the Liquid Detection Alert Appears

When the notice “liquid detection in lightning connector” comes, the acceptable course of action is to disregard the information first and then look for other options. There’s an option to dismiss the notification and do an emergency override in the pop-up.

Reboot It If the iPhone Charging Is Still Not Available

If you’re still having problems with this warning after trying the first two steps, restart your iPhone.

Fix the Liquid Detected in Lightning Connector Bug If It Is a Software Issue

The problems with an unexpected warning about liquid detection are mostly noticed on iOS 14 and 15 phones. People are beginning to doubt the operating system. As a result, resolving the operating system bug will solve the problem.

However, there is a snag in the process. Because Apple gadgets are so secure, tampering with their operating systems might be disastrous.

  • Tenorshare ReiBoot is a safe way to tackle this technology. It enables users to safely reboot their devices without fear of data loss. Let’s go over each step one by one:
  • On your PC or Mac, install the ReiBoot application. After that, you must connect your device to the system and wait for it to be recognized.
  • After the detection has been completed, click the Start button.
  • The UI will present you with two alternatives for rebooting.
  • Select Standard Repair from the drop-down menu.
  • On the following screen, you’ll have the choice to download the appropriate firmware for your devices. When you press the Download button, the app will look for the best firmware and download it.
  • We recommend that you wait patiently until the process is completed, which could take several minutes.
  • To safely restore the phone, click the Start Standard Repair button once the system has finished downloading the firmware. The screen will show a completed message and a Done button at the bottom after some time.

Take Your iPhone to the Closest Apple Store

If the approaches we outlined before fail, you will have no choice but to seek expert help. If the phone says “Liquid detection in Lightning Connector,” don’t try to open it or poke anything. Allow the situation to be handled by the appropriate authorities.

CONCLUSION

Unless it’s an emergency, I would strongly advise against using the Emergency Override option. Charging your iPhone when the Lightning connector is wet can cause permanent damage to your phone.

The best thing to do is wait for your phone to air dry. Just be patient!

FAQs

Q. How do you fix liquid detected in the charging port?

Dismiss It.
Reboot if Emergency Override Doesn’t Work.
Use Apple Charger.
Charge iPhone early.
Use MagSafe Wireless Charging.
Reset All Settings.

Q. What does it mean when it says liquid has been detected in the Lightning connector?

The “lightning connection” is simply another name for the charging port on your iPhone. The “Liquid Detected in Lightning Connector” notice indicates that either your phone’s charging port or the lighting charging cable is damp or moist.

Q. How do I dry out my phone port?

Place your phone in front of a fan or allow it to air dry. If you want to speed up the drying process of your phone’s USB port, place it near an open window or in front of a fan.

Q. How do you remove liquid from iPhone?

The procedure is straightforward. Turn off your iPhone and immerse it in uncooked rice. Make sure it’s submerged in rice for a couple of days. At the very least, the rice should be able to absorb some of the moisture off your iPhone.
5 Shares:
Leave a Reply

Your email address will not be published.

You May Also Like
How to Clean AirPods?
Read More

How to Clean AirPods?

AirPods are probably terrible. Sweat, dirt, and grime remain on the buds and charging case. Regular cleaning is helpful, but care must be taken not to damage it. Here are a few ways in this article: