How To Access Boot Menu in Acer Nitro 5?

Do you want to access the Acer boot menu on your Acer Nitro 5? You have come to the right place.

It could be tricky for the new Acer users to access the boot menu. But it is not a cause of concern, we are always here to help you.

A boot menu is a tool that allows you to access the settings of your computer. It has a boot menu with which you can access the BIOS, Boot Manager, Boot Settings, and Boot Device.

In this article, we will teach you how to access the boot menu in Acer Nitro 5.

Introduction: Acer Nitro 5 Boot Menu

Acer Nitro 5 is a powerful laptop that has a lot of features. It comes with an easy-to-access boot menu that lets users configure and troubleshoot their device without having to turn it off and on again.

To access the boot menu, press and hold the power button for 3 seconds until you see a blue screen with an exclamation mark in the middle of it.

This allows you to change the boot priority, change the boot device, or even turn off your computer.

How To Access Boot Menu in Acer Nitro 5?

We have searched among multiple ways to access the Acer boot menu and found some of the best and easiest ways for you to use.

We assure you that after using these methods you will get the solution and complete access to the boot menu of Acer. Also, you need not visit any other place in search of appropriate solutions and waste your precious time.

The ways to access the boot menu in Acer Nitro 5 are given as:

1. Press and hold the power button for 10 seconds and release it while continuing to hold the power button down.

2. Press the volume up key, volume down key, and power button simultaneously.

3. Press and hold the power button for 10 seconds then release it while continuing to hold the power button down.

4. While pressing and holding the volume up key, press and release the volume down key once.

How do I get into the Acer boot menu?

Acer Nitro 5 is a powerful laptop that offers a variety of features. One of them is an easy way to access the boot menu from any screen. The process is quite simple and can be done quickly by following these steps:

1. Press and hold the power button for about 20 seconds (until you see a screen with flashing dots).

2. Once you see this screen, release the power button when you hear a beep sound after pressing it for about 10 seconds.

3. On the screen, you will see a dark blue screen with a few options and arrows.

4. Press and hold the corresponding arrow for about 10 seconds until you hear two beeps, meaning that it has been correctly unlocked.

5. From any screen, navigate to this menu by pressing F2 or selecting “boot menu” from the taskbar.

Can I enable the F12 Boot Menu on Acer?

Acer Nitro 5 has a hidden F12 Acer boot menu that can be accessed by pressing F12 on the keyboard. This can be useful when you need to access the boot menu and some settings that are not available in the normal boot menu.

To enable the F12 Boot Menu on Acer Nitro 5, try following these steps:

1) Press and hold the F12 button for 10 seconds or more until you see a black screen with white text “Press any key to enter setup”.

2) Press any other key and release it.”

3) Press the F2 button and you will get a menu. Now Navigate to Boot Menu configuration.

4) Press Enter to choose configuration options.

Disable the Secure Boot in BIOS for the Acer laptops?

Some computers may also have a BIOS setup program that allows you to access the menu without needing to enter the boot process.

In order to disable Secure Boot in BIOS, you need to enter the Acer boot menu. There are two methods that you can use to access this menu – pressing F1 or F2 during the boot process.

1. Press the “F2” key on your keyboard to enter BIOS Setup. Your screen should show a blank screen with just the date and time, or something like this.

2. Navigate to “Security” and press the right arrow key twice to highlight the Secure Boot option, then press Enter key to select it.

3. Make sure “Secure Boot” is disabled, and write down or note the BIOS settings: “Boot Mode: Normal (UEFI)”.

4. Press the F10 key on your keyboard to save changes and exit the BIOS setup.

5. After exiting BIOS setup, boot up your computer with the UEFI enabled boot mode setting saved.

Follow the given steps to switch to legacy Boot mode

As disabling the Secure Boot in BIOS, if you want to enable the legacy boot mode. You can use the steps given below after when the Secure Boot mode has been disabled.

(To disable Secure boot mode you can follow the steps given above)

  • At the first boot menu, select “Secure Boot” mode and press enter key.
  • Select “Enable Secure Boot”, then select “UEFI/Legacy BIOS Mode” and press the ‘enter’ key.
  • After selecting legacy BIOS mode, the computer will automatically boot into the legacy BIOS setup, which should be almost identical to the UEFI setup.

How can I change the boot priority on my Acer laptop?

A boot menu is a tool that allows users to select what they want their computer to boot up first. This can be changed by pressing F2 during the start-up process.

The following are the steps to chance the Acer boot menu priority on your Acer Nitro 5:

1. Press and hold the power button until you see a blue screen with an Acer logo on it.

2. Press and release the F2 key during this blue screen, then release the power button when you see “Acer Boot Menu” in front of you.

3. Select “Boot Priority”. This will make your computer boot from the selected device first before any other device is connected to your laptop or PC.

FAQs:

How do I get to the boot menu on my Acer?

Step 1: Press the F2 key when you see the Acer logo on the screen.
Step 2: The Boot Menu will appear on the screen.
Step 3: Press F12 to open BIOS settings.
Step 4: Press Del to delete a partition, or Esc to return to the boot menu.

How to fix the Acer laptop not booting from USB Drive?

If the computer boots up but doesn’t recognize the USB drive, you can access the boot menu by pressing F8 before turning on your computer. After pressing F8, you’ll see a list of options that will help you find what’s wrong with your computer.

What are the steps to access the boot menu in Acer Nitro 5?

 Follow the given steps to access the boot menu-
Power on the laptop.
Press F2 during boot to enter BIOS.
Go to the Boot menu and select “Fast Boot”.
Press ESC to go back to the BIOS menu.
Go to the Boot menu again and then select the “Normal Boot” option.

0 Shares:
Leave a Reply

Your email address will not be published.

You May Also Like