Table of Contents Show
- What does ‘no internet secured ‘mean?
- Unprotected Internet Connection:
- WiFi shows “Internet is not protected” on Windows 11/10
- Solution 1: Update IP release and clear DNS via CMD
- Solution 2: Prevent Windows from turning off the WiFi adapter to save energy
- Solution 3: Try switching your network to 2.4GHz instead of 5GHz
- Solution 4: Configure wireless adapter and USB power options
- Solution 5: Use Windows’ internet troubleshooters
- Solution 6: Reinstall the network drivers
If your Windows 11/10 laptop or desktop PC is connected over a WiFi connection and you see random connection errors that are not protected by the internet, this guide may help you resolve the issue. With positive feedback, we’ve collected and sorted a list of updated solutions that we’ve worked on to actually fix issues for some users in our community and forums.
In rare cases, you may see an “Internet not protected” error, whether you are actually connected to the Internet or, in most cases, an unstable Internet connection.
What does ‘no internet secured ‘mean?
“No Internet secured” indicates that your computer is linked to a private internet network, but the connection is down and you are unable to receive data. This notification normally appears when you try to connect to a Wi-Fi signal that is too far away, but it might appear on any network.
There might be a number of causes for the “No Internet, secured” problem on your machine. For example, an incorrect network setup on your Windows device, an outdated driver, or, if you’re using a laptop computer, your Power Management settings could all be to blame.
Fortunately, if the issue is software-related, you’ll be able to quickly identify and resolve it, allowing you to return to the grid. However, because there are so many reasons that might cause the “No Internet, secured” problem, you may need to attempt more than one of the solutions suggested in this tutorial. That said, it in no way makes the procedure difficult to follow.
Unprotected Internet Connection:
Make sure your Windows 10/11 PC is not currently connected to your VPN connection. If any of the other devices can connect to the Internet over the same network, it means it’s not an ISP (Internet Service Provider) issue. Make sure you are connected to the correct WiFi network to avoid the problem of ‘no internet secured’.
Sometimes we accidentally connected to our neighbors or public networks without recognizing it, and the network happened to be unconnected to the internet. Try restarting your computer, router, and modem together. If you continue to receive the “Internet is not secured” error, continue with the solution below.
WiFi shows “Internet is not protected” on Windows 11/10
Please read the list below and try each solution until WiFi works again.
Solution 1: Update IP release and clear DNS via CMD
- Open an elevated command prompt (that is, run as administrator). Run command prompt as administrator window 11
- Run CMD as Windows 11 administrator. No internet-protected fixes at the Windows 10/11 command prompt, enter each command, one line or less at a time.
ipconfig / release
ipconfig / refresh
ipconfig / flushdns
Solution 2: Prevent Windows from turning off the WiFi adapter to save energy
Windows 10/11 has a default power management setting that allows Windows to turn off wireless adapter devices to save power. Therefore, disabling the power management feature would resolve the “No Internet Secured” problem. Follow the steps below:
- Under the Start menu, search and open the Device Manager.
- Under the device manager window, Double click on your wireless adapter device.
- Move to the Power Management tab. Untick the option “Allow the computer to turn off this device to save power”.
- Hit OK to save the changes.
- Restart your windows and check whether the “No internet issue” is secured.
Solution 3: Try switching your network to 2.4GHz instead of 5GHz
The wireless frequency of the wireless network selected on your computer may also be the cause ‘no internet secured’ error. If your router has a dual-band WiFi connection, try connecting to 2.4GHz instead of 5GHz to check whether the issue still persists.
The Priority Band option is usually located on the Device Manager> Network Adapters> double-click Wireless Adapters > Advanced tab.
Solution 4: Configure wireless adapter and USB power options
Some Windows power options can interfere with your wireless connection and cause problems with your internet being unprotected. Follow the steps below to configure the wireless adapter and USB Power option to avoid the problem of the ‘no internet secured’ error.
- In Windows 11/10, open Edit Power Plan from the Start menu.
- Click Change advanced power settings. Make sure that the word Active is next to it and that the currently active power plan is selected.
- Expand Wireless Adapter Settings> Power Saving Modes> Settings. Set it to Maximum Performance.
- If you are using a USB wireless adapter, also change the following option: Expand USB settings > USB selective suspend setting > Setting. Change it to Disabled. Restart your pc to check if the error is removed.
Solution 5: Use Windows’ internet troubleshooters
Windows 10 and 11 are both extremely complicated operating systems. Even the simplest PC has hundreds of distinct processes operating at the same time, some of which were built two decades ago. This nearly guarantees that you’ll encounter an issue or problem at some time.
Because Microsoft recognizes this, both Windows editions contain a set of automated troubleshooting tools. And internet problems are so widespread that Windows offers two distinct troubleshooters to address them. These programs will run over a list of common problems and attempt to solve any flaws you may have.
To access both internet troubleshooters on Windows, go to:
- On your PC, open the Settings app.
- Select Update & Security on Windows 10. Select System in Windows 11.
- Select Troubleshoot from the list of alternatives, then Additional troubleshooters (10) or Other troubleshooters (11). (11).
- Go through both of the internet troubleshooting tools on this page by clicking on them. Internet Connections and Network Adapters are their names.
These tools should quickly detect and resolve the problem. Continue reading if it says it can’t detect any faults or that it identified one but can’t fix it.
Solution 6: Reinstall the network drivers
Almost all of the hardware on your Windows computer is controlled by “drivers,” which are little bits of software that instruct the machine on how to operate. Some drivers can fail over time, causing the hardware they control to stop operating. You may reset the driver in this instance by deleting it and then reinstalling it.
To do so, first:
- Select Device Manager from the list that displays when you right-click the Windows icon in your taskbar.
- Open the Network adapters menu in the Device Manager window and locate your computer’s Wi-Fi driver. The name may vary from computer to computer but check for Wi-Fi 6 and Wireless Network Adapter.
- Select Uninstall the device from the context menu when right-clicking the driver.
- Check the option that asks if you want to Delete the driver software (Windows 10) or Attempt to delete the driver (Windows 11) in the pop-up that displays, then click Uninstall.
- Reboot your computer.
The Wi-Fi driver will be reinstalled when the machine is turned back on. This should (hopefully) resolve any difficulties.
Windows 10/11 can easily help you identify the problem and provide a solution if you know all the specifications. Everyone knows that troubleshooting features don’t always work, but it’s worth a try as some users have reportedly helped solve problems that aren’t protected by the Internet so just follow the above solutions that would surely help you in resolving the “no internet secured” issue.