There are various ways you can tackle the issues when your device goes blue screen. The case can be because of the hardware or software, leading to a blue screen of death. Often the problem is addressed by your device, and to prevent the blue screen of death, you can consider the below-given methods. The wrong system config info is a standard error that puts the blue screen on the channel and stops your work.
The device states the problem on the green screen and gives you a description of the issue. This can be disturbing to your productivity and an obstacle to your work. This error is standard, and you can quickly fix these following easy methods. In this post, we’ll take you through some of the easy ways in which you can try to fix Bad System Config Info Error on Windows.
1. Use SFC and CHKDSK
The system file checker allows you to scan your computer for corrupted and damaged system files and try to fix them if necessary. Using the System file checker tool, you can quickly check down the files and track the problem. The tool is a built-in Windows utility that scans your computer. You need to go to the command prompt and type SFC/scannow. You can also consider using the CHKDSK tool in your windows. CHKDSK scans your entire drive and tackles the error, and fixes it.
2. Perform a System Restore
One of the best options you can go for is to try restoring your computer to an earlier date when there was no error. A system restore can help to get rid of the rotten system config error problem, and it allows you to roll back to the system. To do a system restore, you need to follow some simple steps :
Start the menu and look for system restore in the search box of your device.
Click on the “System Restore” option.
When you open the system restore option, click the Next button and select the time before the error occurred.
A system restores will help you to hop back to your work and will eliminate the blue screen.
3. Bcdedit command
The third option you can go for is the bcdedit command which you can use to fix the Bad system config info error on your window. When the configuration isn’t correct, or it’s not configured correctly, then you’re more likely to get a bad system config info error. The processors and memory in the configuration may have the wrong value and which can be an obstacle to accessing your device.
To fix this, you need to start the troubleshooting by going to advanced options and command prompt and entering these lines :
bcdedit/deletevalue {default}
bcdedit/deletevalue {default} truncatememory
After entering these commands and rebooting your device.
4. Try to fix your BCD file
One of the main reasons you might be facing the Bad System Config Info error is your BCD file is damaged, and that’s why you’re unable to get access to your windows. You need a bootable USB flash drive with windows to resolve this issue.
You can consider Media Creation Tool if you don’t have a bootable USB drive. You can consider using a bootable USB flash drive with windows, or you can use a media creation tool. Use this command in the prompt by following some basic steps and directions.
bootrec /repairbcd
bootrec /osscan
bootrec /repairmbr
5. Check on your Hard drive and RAM
It isn’t easy to open your pc and look inside it, but if you’re comfortable, consider taking a look inside your PC and ensure the physical parts are arranged correctly. The cables and the RAM should be appropriately connected, as it can be a reason for a Bad system config info error. Check on the RAM sticks and identify the problem; if a particular RAM stick is causing the problem, then consider using your device at low ram or buying new RAM. If everything is connected correctly, check your RAM and hard drive health.
6. Update the drivers
The drivers that are unused or aren’t updated create a problem which results in a bad system config info error. By using Windows and the x key, you can go to device manager, and by clicking the action button, you’ll see a yellow exclamation mark in front of the problematic drivers, click on them specifically and consider updating or reinstalling them. If you experience the same problem, consider connecting with a technician to solve the issue.
7. Check your Windows registry.
It’s a vital data device in Microsoft operating system windows for storing information on various applications and systems. All the info stored in the windows registry controls the system of windows, the essential components like loading of drivers, operations on applications and startup of the window.
Windows registry can be a reason for Bad system config info errors as the registry issues can cause some problems, and a command can quickly fix them. Go to troubleshoot and look for advanced options, click on it and open the command prompt. You can quickly look for commands online to fix this issue.
8. Reset Windows
You often can’t figure out the actual problem, so the best thing you can do is eliminate the system and try again. The best method to ensure that you don’t face this problem again is resetting the windows. A clean install of windows can help you with tons of things, and it can be the perfect choice to make. When you’re looking forward to resetting windows, It will erase all data from your computer, so make sure to back up your important files before you start it.
Final words
All the above-given methods are easy to execute and effectively solve Bad System Config Info Errors. We hope you find this helpful and that you received valuable information from this post.