How To Enable Auto-Login In Windows 10

How To Enable Auto-Login In Windows 10

Logins and passwords are a great method to keep your data private from prying eyes, especially if you operate in a public environment. However, logging in all the time if you’re using your computer in a secure location with a private network might get annoying.Enabling Auto logins in windows 10 is the way to go if you want to cut through the red tape and get to your desktop screen faster.

Continue reading to learn more about auto- login on Windows 10 and other Windows 10 features.

By following this instruction, you may have your Microsoft Windows 10 computer automatically login and bypass the login prompt every time you start it.

How to Enable Windows 10 Auto Login

By enabling auto logins in Windows 10, you may skip the bothersome password box and get right to your desktop. Doesn’t that sound like a time-saver?

Follow the steps below to make it happen as quickly as possible:

1- Open the Run Dialog 

You must first open the Run dialog box on your Windows 10. You may accomplish this by hitting the Windows key + R or by using the Start button to reach the secret fast access menu. Right-click the Start button, scroll down and pick Run to open the quick access menu.

2- Open User Accounts Window

Click the OK button after typing “netplwiz” into the Run window.

3- Disable Password Protection 

You’ll see a list of people who have registered to use the computer in the new window. There’s a check/uncheck button towards the top that says, “Users must provide a username and password to access this computer.” Uncheck this box and click on the Apply button.

 4- Verify Your Decision

After you pick the OK button, another window displays. This one requires validation of your account and password. Fill in the essential information and click OK one more time.

Remember that the next time you restart your computer, you’ll see the sign-in page, but you won’t have to enter a password. These procedures also work to get around the Lock Screen.

How to Use a Windows 10 Domain Account to Enable Auto Login

Using a domain account to enable auto-login on windows 10 requires editing the registry and adding a new auto-login key. To make registry modifications, you’ll also need domain administrator access. However, it’s a really straightforward procedure. Here’s how you can get started:

1- Open the Registry Editor by searching for “regedit” in the Windows Search box or typing “Regedt32.exe” without the quotes in Run.

2- Look for the following key in the left-hand pane’s folders: Microsoft Windows NTCurrentVersionHKEY LOCALSOFTWARE Winlogon

3- Add your domain name by double-clicking on DefaultDomainName.

4- Add your domain username by double-clicking on DefaultUserName.

5- Add your user password by double-clicking on DefaultPassword.

6- Go to Edit > New > String Value to add the new key, AutoAdminLogon.

7- Double-click AutoAdminLogon and change the field’s value to “1.”

8- Restart the computer after exiting the Registry Editor.

How to Use the Windows 10 Registry to Enable Auto Login

Changing your registry is never straightforward on Windows 10. If you miss a step, it might have a detrimental impact on your system. As a result, you may wish to build a recovery point on your computer before beginning these instructions to enable auto- login on windows 10.

Step 1: Open the Registry

Select Run from your Start menu. You may also access the same text box by pressing the Windows logo key + R.

Step 2: Launch the Registry Editor.

When you’re finished, type or paste “Regedt32.exe” into the Run text box and press the Enter key.

Step 3: Locate the Correct Subkey

The left pane of the Registry Editor utility has a number of folders. The precise location of the folder you’re looking for is.

Step 4: Define Registry Change

Now is the time to begin working in the right window pane. Double-click on the DefaultUserName item. Type your username in the following window and click OK.

Double-click the DefaultPassword entry to activate it. When asked, type your password and then click OK.

Step 5: Modify the Registry

The final step is to create a new value for Windows 10 to run when it boots up. This is the section where you construct the automated login entry.

How to Make Windows 10 Auto Lock

Did you know you can set your computer to automatically lock when you leave it? When you go out of range and neglect to set the lock screen, Windows uses devices connected to your computer to detect it. On your PC, follow these steps to enable Dynamic Lock:

1- Go to Settings by pressing the Start button.

2- Next, choose Accounts.

3- After that, select Sign-in choices.

4- Under Dynamic Lock, choose Allow Windows to automatically lock your device when you’re away.

Take your phone with you the next time you leave your computer since Dynamic Lock works with Bluetooth. When you’re out of range for a minute or two, Windows locks your computer without you having to do anything.

Frequently Asked Questions( FAQs)

Q1- On Windows 10, how do I enable a guest account?

A Guest account is not available in Windows 10. With the release of 10159 in 2015, Microsoft disabled this feature. Using any of the online instructions requiring registry modifications or command prompt usage may cause your machine to malfunction.

Q2- How can I set up automatic login for my local account?

R + Windows logo key -> In the Run box, type ‘netplwiz’ (without quotes) and press Enter.
Select your user account in the User Accounts dialog box.
Uncheck the option ‘Users must enter a username and password to access this computer’ -> Apply.

Q3- What exactly is Netplwiz Windows 10?

While enabled, NETPLWIZ is a Windows command that eliminates the requirement for a specific user to input a password when logging into Windows. To use it, go to “search” and put NETPLWIZ into the blank field.

Q4- How can I disable the password requirement in Windows 10?

On Windows 10, go to Start.
To launch the Control Panel, search for netplwiz and select the first result.
Under the “Users for this computer” column, choose the account to erase the password.
To use this computer, you must first create a username and password.
Then press the Apply button.

Q5- How do I disable the screen lock password?

How to Unlock Your Android Phone’s Screen Lock

Select Security > Screen Lock from the Settings menu.
Enter your existing lock screen code if asked > None > Delete.
Leave a Reply

Your email address will not be published.

You May Also Like